AAAwave 12GPU The Sluice V2 Mining frame (Black) and PCIe Riser V011 Pro (12pcs) with 8 pack of P12 PWM 120 mm Fan

AAAwave 12GPU The Sluice V2 Mining frame (Black) and PCIe Riser V011 Pro (12pcs) with 8 pack of  P12 PWM 120 mm Fan

aaawave 12 GPU Steel Open Frame Mining Chassis - Ethereum Zcash Lite coin

Brand Name: aaawave
Material: Steel
Color: Black
Type: Open frame chassis
Product Dimension: L20 x W14 x H20 Inch
Weight: 11lbs

• High quality steel material. Strong & durable, fully protecting your GPU and electronic device.
• Accelerates the air flow and circulation.
• Super cooling design for heat dissipation. Enhances the cooling and extends the service life of graphics cards.
• Professional design. Non-marring and non-slip rubber feet
• Easy & fast installation in 20 minutes with detailed instructions.
• frame only, does not include fans or other CPU, GPU, PSU, motherboards, cables.

Specifications

• Compatible Motherboards: ATX 305x245
• Power Supply: 2 x ATX Power Supply Positions
• Supports 12 GPUs with a solid mounting plate
• Supports 6 motherboard add on cards with a solid mounting plate
• Supports 2.5” and 3.5” SSDs and HDDs
• Supports 8 x 120mm fans
• Assembly required

AAAwave PCIE Riser VER 011 PRO 1x to 16x Graphic Extension for GPU Mining 60cm USB 3.0 Cable, 10 Solid Capacitors, 12 Led Lights, 2x 6PIN

• STABLE and SAFE: 10 FP Solid Capacitors deliver power to Graphics card stably, safely and more effectively. Gold plated USB and 2 connectors
• STABLE CABLE: 60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
• VER 11 PRO: Version 011 Pro riser kits are the newest and top of the line solution for setting up GPU mining rigs.
• REDUCE MOTHERBOARD BURDEN: 6PIN interface provides Graphic card independent power and reduces motherboard burden when using more Graphic cards.
• WIDELY APPLICABLE: Suitable for all Window systems, LINUX and MAC.

IMPORTANT
1. This product is suitable for motherboard with PCI-E slot. Please plug in the power of floppy drive while using it. Make sure
the computer is out of power when you plug in or out the PCI-E extension cable.
2. The cables inside are specially made. Please do not replace them with other cables.
3. To prevent ruining your computers and other equipment, please find the right end to plug in the cable.
4. Use old flat cable for Dual core graphics card and 16X motherboard.

Arctic P12 PWM Pressure Optimised 120mm Fan with PWM ACFAN00133A

Features

• Optimised for static pressure
• Ideal choice on heatsinks, radiators and (partly-) covered case vents
• PWM signal adjusts fan speed
• Newly developed, very quiet motor
• 0 dB mode: silent passive mode when PWM signal is below 5 %

The P12 PWM features completely redesigned fan blades and is optimised for high static pressure. Thanks to this, it is especially effective when used on heatsinks and in situations with higher air resistance. The wide RPM range from 200 to 1800 RPM can be regulated steplessly via PWM. The newly developed motor with a low coil temperature significantly increases the life span of the fan.

Optimised for Static Pressure
During the development of the new P12 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM is particularly suitable for use on heatsinks and radiators.

Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.

More Efficient Technology
The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

200 to 1800 RPM regulated via PWM
Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

0 dB Mode
The P12 PWM is able to switch into silent passive mode when PWM signal is below 5 % due to its new motor. This allows working at your PC in complete silence without any unwanted noise.

High Quality Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.