Sold Out
Zoom the image with the mouse

ARCTIC ACFAN00221A P14 PWM PST 140mm PWM PST Case Fan, Pressure-optimised, 200–1700 RPM - White/Transparent

(No reviews yet) Write a Review
$12.98
MPN
ACFAN00221A
UPC:
840033400923
Availability:
Availability
Weight:
0.80 LBS
Shipping:
Calculated at Checkout

Out of stock

p14-pwm-pst-white-case-fan.jpg

p14-optimised-for-static-pressure.jpg 

Optimised for Static Pressure

During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators

p14-more-efficient-technology.jpg

More Efficient Technology

The motor is powered by a PWM IC of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy without compromising the performance.

p14-maximum-quietness-minimum-vibration.jpg

Maximum Quietness, Minimum Vibration

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

p14-pwm-pst-extended-lifespan.jpg

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan. Due to the low coil temperature of the new ARCTIC fan motors, the service life of the fans increases considerably. Therefore, we extend the warranty to 6 years.

p14-200-to-1700-rpm-regulated-via-pwm-pst.jpg

200 to 1700 RPM regulated via PWM PST

With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

p14-high-quality-bearing.jpg

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

p-14-two-way-installation.jpg

Two Way Installation

  • Push warm air out of the case
  • Pull cool air into your case
Speed:
200–1700 rpm, 0 rpm <5% PWM
rpm Control:
Pulsweitenmodulation – PWM
Static Pressure:
2.40 mm H2O
Airflow:
72.8 cfm | 123.8 m³/h
Bearing:
Fluid Dynamic Bearing
Cable Length:
400 mm
Connector:
4-Pin Connector + 4-Pin Socket
Current/Voltage:
0.12 A/12 V
Starting Voltage:
3.9 V
Noise Level:
0.3 Sone
Ambient Operating Temperature:
0–40 °C

0 Reviews

This product hasn't received any reviews yet. Be the first to review this product!
Write a Review

Shipment Time

Handling time: All orders are shipped as soon as possible within 1-2 business days after payment confirmed. However, we cannot control transit time once your package is handed over to the courier.

We process and ship orders Monday – Friday and are unable to offer weekend or holiday delivery.

Free shipping to continental United States (48 States) only.Alaska, Hawaii & other U.S. Territories shipments have an additional shipping fee equal as Expedited. Expedited shipping is the only shipping method offered for these locations. We do not ship internationally.

We reserve the right to select which shipping company/carrier will deliver your product. This might affect you if you live in a rural community that does not accept deliveries from any specific shipping company.

Return Policies

Return Policy-Product

  • All products sold by Platinum Micro.com are brand new and carry the manufacturer’s full warranty.
  • All products advertised as BULK or OEM are brand new and carry the manufacturer’s full warranty.

*Note: "BULK" and "OEM" items do not come in a retail type of packaging, donot include hardware, accessories, cables,software, or literature. Unless otherwise noted.

  • All products are shipped to the customer the exact same way that we receivethem from the manufacturer.
  • We are NOT responsible for physical damage or misuse of the product, damage or misuse of the product will automatically void the manufacturer warranty

*Note: Platinum Micro.com does not accept returns for refunds or exchanges of the following items: Open Software, Downloadable Software Products (Digital Downloads), Software Product Keycards, Online Subscription Software, and items manufactured by LG, Gigabyte, and Fortinet.

Return Policy- Schedule and Time

  • Platinum Micro.com offers a 30 day return/exchange policy, unless otherwise noted. The return/exchange policy begins on the customers purchase date.
  • No returns or exchanges will be accepted after 30 days.
  • All refunds will be made back to the customer’s original form of payment within 7 business days of receiving the return merchandise.
  • Return Merchandise Authorization number (RMA) are valid for only 10 business days. Packages must be received by us within 10 business days after the RMA number has been issued. Packages received after 10 business days will not be accepted and the warranty period will be considered voided and cancelled.
  • RMA processing time is 5-7 business days once the package has been received.
  • There is a restocking fee of 15%onall returns for refund. We charge this 15% restocking fee for all returns for refund to encourage customers to purchase products they intend to keep. We offer RMA replacement without any restocking fee to customers who have received a defective product.
  • Shipping costsisnon-refundable.
  • Product exchanges can be accepted for defective items, the same exact item only. Product returns can be accepted for defective items only. Productreturns for non-defective items will incur a 15% re-stocking fee, deducted from the refund amount.

Return Policy- Customer’s Duty

  • Platinum Micro.com does NOT offer "Advanced Replacement" for the exchange of defective merchandise.
  • Platinum Micro.com does NOT pay the return shipping costs for defective merchandise.
  • We are NOT responsible for product defects, because we do not manufacturethe products we sell. Platinum Micro.com will pay for shipping "Back to the customer" for exchange of defective items.
  • All returns and exchanges must be accompanied with a Return Merchandise Authorization number (RMA number). Please contact us foraRMA number prior to sending your package. Platinum Micro.com will NOT accept packages without prior authorization and a RMA number.
  • All packages being shipped to Platinum Micro.com must have a valid tracking number that is with a majorcouriersuch as UPS, FEDEX, or USPS.